This active speaker system has Input and Output sockets, that are electronically balanced. LINE/MIC, switch to select either "Mic" position if a microphone or a low level appliance is connected; the "Line" position allows connection of high level signal sources. GAIN, that regulates pre-amplification of the signal coming from the input "IN". HIGH/MID/LOW, 3-band equalization to modify the sound tone. VOL, for volume potentiometer to control the channel signal level. GND/LIFT, is a 2-position selector for seperating the signal source ground and the amplifier ground circuits. A.A.S.S. processor circuit which protects the transducers from overloads. PWR LED signal to indicate the switching on of the system. TONE, this control allows you to adjust the tone within 0 ~ 10. HP FILTERED OUT, electronically balanced XLR connector, serve to output the high frequency signal.

A POWER switch that turns the apparatus on or off. FUSE holder, is for containing the fuse which is a safety device that protects the AC supply circuit of the unit. AC power socket, to connect the power cord. Voltage Selection Switch that provides two voltage selections: 115V or 230V which depends on actual application.
 

Specification

• Frequency Range (-10dB): 40Hz-18KHz
• Power Capacity (Continous Pink Noise): 300W
• Nominal Impedance: 8 ohms
• Sensitivity (1W@1m): 97dB
• Nominal Dispersion: 90� H x 60� V
• Crossover Frequency: 2.5 Hz
• LF Driver: FB1503
• HF Driver: FE001
• Maximum SPL: 122dB
• Input Connectors: XLR
• Dimensions (HxWxD): 720 x 365 x 495 mm
• Net Weight: 28.5 kg

Features

• Enclosure adopted a high impact polymer, injection molded shaping. It has high intensity and light weight, set a handle, easy to carry it. Designed non-symmetrical enclosure outline. It can be used for fold-back speaker.
• Woofer speaker make high powered pro-speaker. It has wide-range, low distortion, high sensitivity, adopted a aluminum frame. It has non-mechanical resonance.
• Driver selected a titanium diaphragm, and light mass voice coil, make it high frequency reached 18,000Hz.
• The new A.A.S.S. (automatic amplitude servo system) processor ensures total protection of the transducers and improvement of the acoustic response.